English
Português

10% TSOHLE ka har'a thepa ea 800 ton servo auto parts e etsa tšepe e etsang extruding dropforging e batang e chesang die forging hydraulic press

10% OFF in stock 800 ton servo auto parts gear making metal forming extruding dropforging cold hot die forging hydraulic press Featured Image
  • 10% TSOHLE ka har'a thepa ea 800 ton servo auto parts e etsa tšepe e etsang extruding dropforging e batang e chesang die forging hydraulic press
  • 10% TSOHLE ka har'a thepa ea 800 ton servo auto parts e etsa tšepe e etsang extruding dropforging e batang e chesang die forging hydraulic press
  • 10% TSOHLE ka har'a thepa ea 800 ton servo auto parts e etsa tšepe e etsang extruding dropforging e batang e chesang die forging hydraulic press
  • 10% TSOHLE ka har'a thepa ea 800 ton servo auto parts e etsa tšepe e etsang extruding dropforging e batang e chesang die forging hydraulic press
  • 10% TSOHLE ka har'a thepa ea 800 ton servo auto parts e etsa tšepe e etsang extruding dropforging e batang e chesang die forging hydraulic press
  • 10% TSOHLE ka har'a thepa ea 800 ton servo auto parts e etsa tšepe e etsang extruding dropforging e batang e chesang die forging hydraulic press

Likarolo tsa mochini oa hydraulic press:

1.Moqapi o utloahalang le karolo e ntle ea ts'ebetso e etsa hore e sebelisoe tlaase.

2.Cylinder e amohela ho forge le ho sila, e na le botšepehi bo botle boemong ba khatello e phahameng.

3.Mefuta e mengata ea lebelo la ho sebetsa e ntlafatsa katleho ea tlhahiso.

4.Matha lerata le tsitsitseng, le tlase, ka leihlo la motlakase bakeng sa polokeho ea basebetsi.

5.Easy ho beha le mochine ka PLC le touchable phanele.

6.Pressure e fetolehang ka bongata bo boholo bakeng sa litlhoko tse fapaneng.

7.Frame le beam e sebetsang li na le tataiso e nepahetseng, e thata le e thata, haholo-holo e loketse ho hatella likarolo tse monate.


  • Bongata ba Odara: 1 Sekhechana/Likotoana
  • Matla a Phepelo: 500 Likotoana/Likotoana ka selemo
    • Khoasolla joalo ka PDF

    Lintlha tsa Sehlahisoa

    Bareki ba rona

    Customers Feedback

    Pontšo

    Li-tag tsa Sehlahisoa

    Ntho Yuniti Litlhaloso tsa Sehlahisoa
    YHA3-100TS YHA3-150TS YHA3-200TS YHA3-300TS YHA3-500TS
    Max. Khatello ea ho sebetsa Mpa 21 21 20 24 25
    Main cylinder Force kN 1000 1500 2000 3000 5000
    Max. Stroke ea pheleu mm 350 350 350 350 350
    Max.Bophahamo bo bulehileng mm 550 550 600 700 900
    Lower cynder nominal force kN 150 200 300 300 400
    Max.stroke ea cylinder e tlase mm 150 150 150 200 200
    Matla a cylinder e ka holimo kN
    Ho otla ha moqomo o kaholimo oa ejection mm
    Lebelo la pheleu Tlase ha ho mojaro mm/s 260 250 270 260 250
    Ho hatella mm/s 10/25 10/20 10/15 8/15 8/15
    Kgutla mm/s 250 240 240 230 230
    Sebaka se sebetsang sa tafole ea ho sebetsa RL(kholomo ka hare) mm 550 550 550 550 650
    FB(bohale) mm 600 600 600 650 700
    Boemo ka kakaretso LR mm 1550 1760 1830 2150 2250
    FB mm 1260 1260 1360 1550 1850
    H mm 2580 2650 2750 3020 3550
    Matla a motlakase kW 7.5 7.5 11.6 16.4 24.5
    Kakaretso ea boima ba 'mele(Hoo e ka bang) kg 4500 3400 3800 4500 7800
    Bongata ba oli(Hoo e ka bang) L 350 350 400 450 500
    Yuniti Litlhaloso tsa Sehlahisoa
    YHA3-650TS YHA3-800TS YHA3-1000TS YHA3-1500TS YHA3-2000TS YHA3-3000TS
    Mpa 25 24 24 24 25 24/40
    kN 6500 8000 10000 15000 20000 30000
    mm 500 500 500 500 500 500
    mm 1000 1000 1200 1400 1500 1500
    kN 500 500 500 600 1000 1000
    mm 200 200 200 200 200 200
    mm/s 210 200 190 190 190 190
    mm/s 8/16 8/16 8/16 7/9 6/8 4/6
    mm/s 200 190 180 180 180 180
    mm 750 850 1000 1200 1500 1500
    mm 800 950 1060 1400 1500 1500
    mm 2370 2550 2950 3500 3900 4200
    mm 1800 1850 2200 2400 2600 2900
    mm 3700 3950 4100 5250 5650 5850
    kW 31 31 49.6 31*2 49.6*2 49.6*3
    kg 11500 13500 21000 25000 33000 42000
    L 800 800 1000 1300 1500 1800

    0706

    Melemo ea mochine oa rona:

    l Ka sistimi ea Servo

    YIHUI Hydraulic press e nang le servo system, e ka u tlisetsa mefuta e 10 Melemo e ka tlase:

    1. E ka qoba ho tsoa ha oli. Hobane ho sebelisa Servo motor, mocheso oa oli o ka ba tlase.

    2. Senyesemane le naha ea bareki puo ea lehae, sebopeho sa ts'ebetso ea lipuo tse peli, ho bonolo ho sebetsa.

    3.E ka boloka 50% - 70% ea matla a motlakase.

    4.Parameters le Lebelo li ka fetoloa skrineng sa ho ama, ho bonolo ho sebetsa. (Mochine o se nang tsamaiso ea servo, lebelo le ke ke la fetoloa.)

    5.E ka ba lilemo tse 3 ho isa ho tse 5 bophelo bo bolelele ba tšebeletso ho feta mochine o tloaelehileng.

    ho bolela hore, haeba mochini o tloaelehileng o ka sebetsa lilemo tse 10, mochini o nang le servo o ka sebelisa lilemo tse 15.

    6.Ensure polokeho le bonolo ho tseba phoso, ho bonolo ho e etsa ka mor'a tšebeletso. Ka lebaka la alamo e ikemetseng le sistimi ea ho rarolla mathata.

    7.Ho bonolo haholo ho fetola hlobo, nako e khutšoanyane ea ho fetola hlobo.

    Hobane e na le ts'ebetso ea memori, ha o sebelisa hlobo ea mantlha, ha ho hlokahale hore o fetole paramente hape,

    8.Ho khutsa haholo, ha u na lerata.

    9.Ho tsitsitse ho feta mochine o tloaelehileng.

    10.Ho nepahala ho phahameng ho feta mochine o tloaelehileng.

    Re ne re ka khona ho fana ka mochini o tloaelehileng feela, liforomo, letsoho la roboto(manipulator), theknoloji ea mochini oa phepelo ea likoloi, le mechini e meng e amanang le eona empa hape le ts'ebeletso e felletseng ea tlhahiso.

    l Likarolo tse kholo li romelloa ho tsoa Japane le Taiwan. Kahoo boleng bo haufi le tlhahiso ea Japane, empa theko ea yuniti e tlase ho feta tlhahiso ea Japane.

    l Feme ea rona e ikhethile ho nts'etsopele e ikemetseng le ho hlahisa mochini oa khatiso oa hydraulic ka lilemo tse fetang 20. Kahoo sehlahisoa se tsitsitse ebile se boleng bo phahameng.

    l 'Mele oa mochini, re sebelisa sebopeho sa ho kobeha, se matla haholo ho feta sebopeho se tloaelehileng sa welding.

    l Pipe ea oli, re sebelisa sebopeho sa Clip-on, se thata haholo ho feta sebopeho se tloaelehileng sa welding. Thibela ho tsoa ha oli.

    l Re nka li-block tse ngata tse kopaneng tsa oli, ho bonolo haholo ho hlahloba mochini le mochini oa ho lokisa.

    Taolo ea Boleng

    Likhatiso tsohle tsa hydraulic fekthering ea rona li fetile CE, ISO, SGS, BV setifikeiti.

    Lintlha tsa Setsebi

    1. Ho sebelisa tsamaiso ea hydraulic e tsoetseng pele ea Taiwan, e tsitsitseng haholoanyane, e sireletsehileng le e ka tšeptjoang haholoanyane.

    2. Khatello, stroke le ho boloka khatello ho ka fetoloa ho latela tlhokahalo ea ts'ebetso.

    3. Litšiea tse 'nè li entsoe ka tšepe e nang le matla a phahameng a alloy e nang le chrome e thata e entsoeng ka holim'a metsi le ho hanyetsa hantle ha abrasion.

    4. Bolster e tsamaeang le worktable li na le li-cylinder tsa khetho ea ejecting, e finyellang litlhoko tse fapaneng tsa ejecting tsa lihlahisoa tse fapaneng.

    5. Taolo ea dijithale e finyelloa ka moralo oa potoloho ea lenaneo la PLC le sistimi e sebetsang ea li-touch panel.

    Sebaka se sebetsang

    1. Cold extrusion molding le stamping bakeng sa likarolo tsa likoloi, mocheso oa mocheso oa LED le lisebelisoa tsa hardware, joalo-joalo.

    2. Ho otlolla ho sa tebang le ho bopa bakeng sa likarolo tsa tšepe le tse se nang tšepe.

    High Speed ​​​​Hydraulic Press YH-FAST System

    Extruding Height Ho feta 50MM

    Ho oa ka potlako

    Ho tloha ka potlako ho ea ho lebelo le butle

    Ho lokolloa ha Accumulator

    Cylinder e fetola pompo ka bo eona bakeng sa ho hatella le ho etsa sebopeho.

    Sistimi ea oli ea hydraulic ea setso e tsamaisoa ke enjene le pompo. Ha tonnage e tiisitsoe, lebelo la ho hatella ka potlako, ho hlokahala matla a motlakase le phallo ea pompo e eketsehileng. Ka ho sekaseka phallo e hlokahalang ea oli mohato o mong le o mong o hlokang, re boloka matla a eketsehileng a hlahisoang nakong ea ho tobetsa butle ka li-valve tsa motlakase ho ea ho accumulator. 'Me nakong ea ho tobetsa ka potlako, lets'oao le tla fetisetsoa ho electromagnetic ho qala accumulator. Joale matla a eketsehileng a tla lokolloa ho tlatsetsa ho hatella ka potlako. Sena se finyelloa ka ho eketsa lihlopha tse ngata tsa li-accumulators tsa matla. Ka hona re ntlafatsa lebelo la ho hatella le katleho ea tlhahiso.

    Ntlafatsa lebelo la khatello ea mochini oa hydraulic.

  • E fetileng:
  • E 'ngoe:

    • 3

    Hobaneng ha lik'hamphani tse ngata tse tummeng tsa brand li sebelisana le rona?

    1.Feme ea rona e khethehile ho nts'etsopele e ikemetseng le ho hlahisa mochine oa khatiso oa hydraulic ka lilemo tse 19. Kahoo sehlahisoa se tsitsitse ebile se boleng bo phahameng.

    2. 'Mele oa mochini, re sebelisa sebopeho sa ho kobeha, se matla haholo ho feta sebopeho se tloaelehileng sa welding.

    3. Pipe ea oli, re sebelisa sebopeho sa Clip-on, se thata haholo ho feta sebopeho se tloaelehileng sa welding. Thibela ho tsoa ha oli.

    4. Re nka li-block tse ngata tse kopantsoeng tsa oli, ho bonolo haholo ho hlahloba mochine le mochine oa ho lokisa.

    5.Likarolo tse kholo li romelloa ho tsoa Japane le Taiwan. Kahoo boleng bo haufi le tlhahiso ea Japane, empa theko ea yuniti e tlase ho feta tlhahiso ea Japane.

    6.Fektheri ea rona e ka fana ka litšebeletso tse feletseng tsa mohala, tse kang hlobo, theknoloji ea ts'ebetso, le mechine e meng e amanang le eona.

     

    4

    Setifikeiti :

    2

    1

    YIHUI Hydraulic Press e nang le servo system, e ka u tlisetsa melemo ea mefuta e 10 joalo ka tlase:

    1.Ka qoba ho lutla ha oli. Hobane ho sebelisa Servo motor, mocheso oa oli o ka ba tlase.
    2.Senyesemane le naha ea bareki puo ea lehae, sebopeho sa ts'ebetso ea lipuo tse peli, ho bonolo ho sebetsa.
    3.E ka boloka 50% - 70% ea matla a motlakase.
    4.Parameters le Lebelo li ka fetoloa skrineng sa ho ama, ho bonolo ho sebetsa.
    (Mochini o se nang sistimi ea servo, lebelo ha le khone ho fetoloa.)
    5.E ka ba lilemo tse 3 ho isa ho tse 5 bophelo bo bolelele ba tšebeletso ho feta mochine o tloaelehileng.
    Ho bolela, haeba mochini o tloaelehileng o ka sebetsa lilemo tse 10, mochini o nang le servo o ka sebelisa lilemo tse 15.
    6.Ensure polokeho le bonolo ho tseba phoso, ho bonolo ho e etsa ka mor'a tšebeletso.
    Ka lebaka la alamo e ikemetseng le sistimi ea ho rarolla mathata.
    7.Ho bonolo haholo ho fetola hlobo, nako e khutšoanyane ea ho fetola hlobo.
    Hobane e na le ts'ebetso ea memori, ha o sebelisa hlobo ea mantlha, ha ho hlokahale hore o fetole paramente hape,
    8.Ho khutsa haholo, ha u na lerata.
    9.Ho tsitsitse ho feta mochine o tloaelehileng.
    10.Ho nepahala ho phahameng ho feta mochine o tloaelehileng.

    • Re romelle molaetsa oa hau:

    Ngola molaetsa wa hao mona mme o re romele wona

    Lihlopha tsa lihlahisoa

    Tobetsa Enter ho batla kapa ESC ho koala